Rescue-Source-Logo-small


PMI D4

UL Classified to NFPA 1983 (2012), T
General Use EN12841-C, ANSI Z359.4
  • The PMI D4 Work/Rescue Descender features a unique and innovative cam action, which offers precise control at slow or fast speeds.
  • It works by way of one cam operating inside another cam
  • Suitable for a two man rescue
  • Handle mechanism is designed to rotate through 360 degrees making its use easy and simple.
  • Handle is made from aluminum and is coated to provide extra grip
  • Sizing Info: 10.5 mm-11.5 mm rope
  • MBS: 16kN
  • Weight: 1.8 lbs
  • Length: 5.5″
  • Width: 3.25″
  • Working Load limit: 240 kg

Price: Regular Price $252.00


PMI D5

UL Classified to NFPA 1983/2017
General Use EN12841:2006/C, ANSI Z359.4:2013
  • Double-stop device with an auto-lock function, which is activated whenever the operator releases the handle; and a panic-brake function
  • Has a double-locking safety mechanism
  • The side plates are designed so that they cannot be rotated open, while under load, due to the position of the carabiner
  • Easy to attach/detach from the rope without having to detach from the harness
  • Features a progressive cam action, which offers precise control during low or high speeds
  • The cam is made from solid, stainless steel for maximum durability, even in harsh environments, such as Geotech work
  • Rope size: 12.5 mm – 13 mm
  • MBS: 4,945 lbf. (22kN)
  • WLL (working load limit): 500 lbs.

Price: Regular Price $269.00


Rock Exotica Kootenay Ultra Pulley

CE Certified to UIAA127/EN12278

The Kootenay Ultra knot-passing pulley has two holes for tag lines, a dual bearing and other features make the Kootenay Ultra the most advanced pulley of its type. Extremely compact and lightweight. Simplifies high-strength tie-off with a single locking screw, stowable within the axle. Uses two independent sealed ball bearings for increased durability and efficiency. Two additional holes to separate tag lines and hoist lines, helping prevent spinning of the load and interference with connectors.

  • Double bearing 8,767 lbf. (39kN)  | 25 oz. |  Dimensions: 8.57″ x 4.1″ x 2.94″

Price: Regular Price $220.00


RQ3 Picket Anchor Plate

RQ3-Gear-LogoThe RQ3 Picket Anchor Plate is an invaluable tool to utilize in conjunction with the cliff picket anchors you create. When used it produces a reliable mode for attaching your systems. It provides optimum spacing for the pickets and eliminates the need to use webbing to tie one picket to another. On the end of the anchor plate is the attachment point, which is raised for easy access. Made to the same high standards as our other RQ3 rigging plates, the Picket Anchor Plate was specifically designed to work with the RQ3 Cliff Pickets.

Features:

  • Five picket holes
  • One anchor attachment point
  • One raised end for easy access to webbing and anchor attachment points
  • Strength: 12,000 lbs (53 kN).
  • Length: 35″
  • Weight: 3.1 .lbs

Oversized shipping charges apply
Click here to download instructions

Price: Regular Price $94.50


RQ3 Picket Carrying Case

The RQ3 Picket Carrying Case is designed to hold our system perfectly. It is a steel-coated case that is compact, easy to carry and sturdy enough to ensure you can get the anchor system to any rescue. It can be worn over the shoulder, across the body or can mount in rescue vehicles with brackets (Mounting Brackets sold separately).

Features:

  • Plate to secure fit anchor plate in place
  • Use nylon strap with rubber pad two ways — over shoulder or across body
  • Includes plates with notches for secure system fit
  • Includes Cam-lock buckles to secure system into case
  • Picket/Driver Puller does not fit in case (carried separately)
  • Made in the USA

Price: Regular Price $95.00


RQ3 Rescue Pulleys

RQ3-Gear-LogoUL Classified to NFPA 1983 General Use

Years ago when Rescue 3 Instructor Trainer Barry Edwards designed these pulleys his primary goal was to make them strong but weigh less. The side plates are made of high grade aluminum and are slimmer than other pulleys, with a series of holes to cut down on the weight. The bolt, washers, lock nuts, and sealed ball bearings are stainless steel, to stand up to the conditions of the rescue environment. Manufactured by Seattle Manufacturing Company, one of the leading industry professionals in the rescue market.

  • High-grade aluminum side plates
  • Stainless Steel components for long working life
  • Prusik minding design

PU8708N  2″ Double Prusik Minding with Becket
2″ x 1/2″   6.25″ x 3″ x 1.5″  8,093 lbf. (36kN)  .82 lbs
Becket: 4,386 lbf (19.5kN)

PU8710 4″ Single Prusik Minding
4″ x 1/2″  5″ x 3″ x 1.25″  11,200 lbf. (49.8kN)   1.3 lbs


 

 

Price: Regular Price $85.95$92.00


RQ3 Stretcher Rigging Plate

RQ3-Gear-Logo

  • Designed as a connection point with enough holes for all the lines
  • Used for litter points, litter tender or other complex systems
  • Weight: 11.84 oz..
  • Material: Aluminum
  • Strength: 12,200 lbf. (54kN)
  • Dimensions: 10″ x 3.75″

 

Price: Regular Price $69.50


SMC Standard Aluminum Locking Carabiners

UL Classified to NFPA 1983 Technical Use

While the term “standard” refers to their size, SMC’s locking aluminum carabiners have truly become the standard in our industry. Their high strength, light weight and wide gate opening have made them the choice of many mountain rescue teams and fire department rescue squads. They feature a high strength aluminum alloy frame and gate, plus stainless steel internal parts. The nuts lock on the gate to prevent jamming. The colors help when coding equipment for different rope packs or different applications.

  • CA5000N |  Bright | .82 in. | 6,070 lbf.(27 kN) | 2.6 oz
  • CA5020N | Red Anodized | .82 in. | 6,070 lbf.(27 kN) | 2.6 oz
  • CA5010N | Black | .82 in. | 6,070 lbf.(27 kN) | 2.6 oz

Price: Regular Price $20.00$23.00


SMC Steel Rescue Carabiners

UL Classified to NFPA 1983 General Use

Designed for rescue, SMC’s Locking D carabiners are state-of-the-art. With thousands of these carabiners in service, they have proven themselves reliable. The carabiner gates and screw sleeves are constructed of stainless steel for greater strength and the nuts lock on the gate to prevent jamming. These carabiners have become the choice of many mountain rescue teams and fire department rescue squads.

  • CA4150N | Large | Steel | Bright | 1.20 in. | 10,341 lbf.(46kN) | 10.6 oz
  • CA4130N | Large | Heat-Treated Steel | Bright | 1.20 in. | 14,613 lbf.(65kN) | 10.6 oz
  • CA4186N | Standard | Alloy Steel | Bright | .94 in. | 10,116 lbf.(45kN) | 6.6 oz

Price: Regular Price $36.00$46.75


RQ3 Lightweight Cliff Picket

RQ3 Lightweight Cliff Picket

RQ3-Gear-LogoThe RQ3 Lightweight Cliff Picket is back by popular demand! When there are no rocks, trees or man-made anchors, these are a must for your rescue cache. Our 3-picket system is capable of holding thousands of pounds. Made from 1-inch DOM steel tubes, cut to lengths then hand-sanded and de-burred. The head and points are TIG welded together with a V-notch to ensure full penetration of each and every weld. We also use a custom-made tube turning machine and hand-weld each picket while the tube is turned for maximum strength.

Third party tested by Northwest Labs of Seattle Inc.

Weight: 5.9 lbs.
Length: 48″
A picket will show deflection of 1 inch at 2,000 lbs. (26.68kN)

Oversized shipping charges apply

Click here to download instructions

 

Price: Regular Price $94.50$269.50


RQ3 Picket Driver

RQ3 Picket Driver/Puller

RQ3-Gear-Logo

The RQ3 Picket Driver is designed to make installing picket systems as efficient and safe as possible. Weighing in at 11.2 pounds, RQ3 Picket Driver is made of two inch diameter, eighth inch thick, drawn over mandrel steel tubing. The 18 inch body keeps the picket aligned with the direction of each drive-stroke, ensuring every strike drives the stake deeper into the ground without any energy wasted to the sides. The driver handles are bent at right angles and MIG welded to the body at right angles, allowing for numerous different holds on the driver to maximize user ergonomics and the force of each blow. The weighted end cap is 2 ½ inches wide and welded using the TIG method. Weight in the cap end increases the force of each strike delivered by the user, reducing the overall number of strokes required to sink the stake. Fewer strikes delivered along the full length of the picket, rather than off-angle, extends the life of the stake an estimated ten times longer than a picket driven with a sledgehammer or post driver. The RQ3 Picket Driver/Puller is designed to be used with RQ3 pickets only manufactured after February 2016. Other pickets may damage the Picket Driver/Puller head and void the warranty.

Weight: 11.2 lbs.

Click here to download instructions

Price: Regular Price $225.00


RQ3 Picket System

RQ3-Gear-LogoThe RQ3 Picket System includes: 

  • Three RQ3 Cliff Pickets
  • 1 – RQ3 Picket Anchor Plate
  • 1 – RQ3 Picket Driver and Case

RQ3 Lightweight Cliff Picket

RQ3 Cliff Pickets When there are no rocks, trees or man-made anchors, our pickets are a must for your rescue cache. Our 3-picket system is capable of holding thousands of pounds. Made from 1-inch DOM steel tubes, cut to lengths then hand-sanded and de-burred. The head and points are TIG welded together with a V-notch to ensure full penetration of each and every weld. We also use a custom-made tube turning machine and hand-weld each picket while the tube is turned for maximum strength.

RQ3 Picket Anchor Plate is an invaluable tool to utilize in conjunction with the cliff picket anchors you create. When used it produces a reliable mode for attaching your systems. It provides optimum spacing for the pickets and eliminates the need to use webbing to tie one picket to another. On the end of the anchor plate is the attachment point, which is raised for easy access. Made to the same high standards as our other RQ3 rigging plates, the Picket Anchor Plate was specifically designed to work with the RQ3 Cliff Pickets. It features five picket holes, one anchor attachment point, and one raised end for easy access to webbing and anchor attachment points.

RQ3 Picket Driver/Puller is unique because it not only drives in the pickets but it also pulls them out when you are done. When you use the driver with your cliff pickets you are extending their service life 10 to 1 compared to solid pickets. The Picket Driver is made of case-hardened steel and the handles are TIG-welded for strength and for an extended life. Weight: 11.2 lbs. The RQ3 Picket Driver/Puller is designed to be used with RQ3 pickets only manufactured after February 2016. Other pickets may damage the Picket Driver/Puller head and void the warranty.

Picket System Case Keep your picket system safe and organized in a steel-coated case. The case has Cam-Lock buckles to secure the system and has a nylon strap with rubber pad to wear the system over shoulder or across the body. This case allows you to easily carry the system to the location you need an anchor system. It is compact and easily fits in any truck. (The driver is carried separately and does not secure into the case)

  • Overall weight of system with case: 41 lbs.
  • Overall size: 52″ x 15″ x 4″
  • Oversized shipping charges apply

Click here to download instructions

Price: Regular Price $645.00

www.rescuesource.com • Call: 1-800-457-3728